In case you serve wine generally to your company, you might want a glass rack in your dining room. A wall-mounted wineglass holder is an great rack for positioning over a hutch or sideboard table. The benefit of just reaching for cups will allow you to display a sophisticated evening conveniently. Make a discussion article by setting up your special wall-positioned wineglass rack. A handful of pieces of timber and some fundamental instruments are usually all you need to set-up an powerful rack that has a shelf over for a small art piece or cork group.
1. Location the 1-by-12-by-24-inch oak plank on a work area. Determine and mark the board at 6, 12, and 18 inches. That is the rack support board.
2. Place a 1-by-2-by-12-inch oak board on a work surface. Arrange a 1/2-by-1/2-by-12-inch oak board in the center of very first board making sure that they are parallel. Do this for all six boards. These are typically the position assemblies for the rack.
3. Set 2 slot assemblies on each pencil symbol on the rack aid board. The assemblies ought to span the width of the support plank. Place the 1/2-inch side of the assembly down. Leave a 3/4-inch area amongst the two assemblies. That will allow the stems of the glasses to move in between them. Drive end nails into the assemblies to attach them to the support board. Space the nails evenly every 2 inches. The nails ought to go down through the core of the two slot assembly boards into the support board.
4. Sand the wineglass rack with fine-grit sandpaper. Sand with the grain.
5. Apply a lumber finish. Enable the finish to dry out before touching.
6. Pick a destination to build the rack over a wall. Line up the brackets 22 inches apart on the wall. Mark the holes with a pencil. Screw the brackets to the wall.
7. Center the rack to the brackets. Bolt the mounting brackets to the bottom of the rack.
8. Slide the glasses directly below the rack between the slot assemblies.
1. Location the 1-by-12-by-24-inch oak plank on a work area. Determine and mark the board at 6, 12, and 18 inches. That is the rack support board.
2. Place a 1-by-2-by-12-inch oak board on a work surface. Arrange a 1/2-by-1/2-by-12-inch oak board in the center of very first board making sure that they are parallel. Do this for all six boards. These are typically the position assemblies for the rack.
3. Set 2 slot assemblies on each pencil symbol on the rack aid board. The assemblies ought to span the width of the support plank. Place the 1/2-inch side of the assembly down. Leave a 3/4-inch area amongst the two assemblies. That will allow the stems of the glasses to move in between them. Drive end nails into the assemblies to attach them to the support board. Space the nails evenly every 2 inches. The nails ought to go down through the core of the two slot assembly boards into the support board.
4. Sand the wineglass rack with fine-grit sandpaper. Sand with the grain.
5. Apply a lumber finish. Enable the finish to dry out before touching.
6. Pick a destination to build the rack over a wall. Line up the brackets 22 inches apart on the wall. Mark the holes with a pencil. Screw the brackets to the wall.
7. Center the rack to the brackets. Bolt the mounting brackets to the bottom of the rack.
8. Slide the glasses directly below the rack between the slot assemblies.
About the Author:
Want to find out more about Wine glass rack, then visit Peter parker's site on how to choose the best under cabinet glass rack for your needs.